Zoomlion: pump vibration use and parameter adjustment

single girder gantry cranePump vibration principle belong active tracking pumping commutation frequency compensation to a boom cycle cylinder pressure, to achieve the end of the minimum amount of vibration, the vibration control technology has an international patent, tested performance testing and actual site, the amount of vibration can be greatly reduce work to improve truck safety and fatigue life are of great help. The system automatically starts after the pumping capacity greater than 50 percent, according to production needs but you can turn off the valve to determine if the vibration control system is enabled.
How to use:
1. boom commenced guaranteed to be compensated at the fuel tank joint angled (≤170º), 37 m pump cylinder is compensated for the 2nd boom cylinder, 45 m, 48 m boom truck for the 3rd cylinder , 56 m boom cylinder pump is on the 4th;electric magnetic overhead crane2. When the pumping operation is not performed, turn off the valve control system;3. Under normal circumstances, in order to save energy accumulator, reducing vibration control device worn in the small displacement pumping or pumping level, the system can be shut down;
4. If the level of pumping large displacement, vibration will be larger boom ends, you can choose to open the vibration control system, under normal circumstances, the vibration will be effectively alleviated;
5. If the open valve, but increased vibration, under the premise of ensuring safety, the following manner to adjust the phase angle until the optimum level of vibration, generally have no need to adjust the power-up time;
6. If the adjusted parameters, via SMS to the new parameter information back to the service personnel
7. Adjust the remote control must be in the state, this time all the buttons panel controls include horn buttons are invalid, so the adjustment is completed as soon as possible, do not affect use.